Immersion Probes for Small Volumes
These Hellma micro immersion probes have been specifically developed for measurements in small volumes. Due to their slim form, less sample material is required for a measurement to be taken.
The sample flow at the location where the measurement takes place is only minimally modified due to the compact form of the probes. High quality coated mirrors, together with carefully optimised optical geometry, ensure that these probes have outstanding transmission characteristics.
Product info 661.610
| Type | 661.610-UV |
| Window material | Quartz SUPRASIL® 300 |
| Mirror material | Quartz SUPRASIL® with aluminium mirror layer |
| Barrel material | Stainless steel 1.4435 (316 L) |
| Probe head seal | Epoxy glue |
| Outside Ø | 3.2 mm |
| Total length | 135 mm |
| Max. immersion depth | 85 mm |
| Light path | 5 mm, 10 mm |
| Typ. transmission | UV/Vis approx. 20 % in air above 300 nm |
| Max. pressure | 6 bar |
| Max. temperature | 150 °C |
| Fibre-optic cable | Built-in, not exchangeable UV/Vis–2 m* 240 nm–1100 nm (41.667 cm-1–9.100 cm-1) NIR on request UV/Vis–low solarisation on request |
* Fibre-optic cables available in various lengths.
back
Product info 661.611
| Type | 661.611-UV |
| Window material | Quartz SUPRASIL® 300 |
| Mirror material | Quartz SUPRASIL® with aluminium mirror layer |
| Barrel material | Stainless steel 1.4435 (316 L) |
| Probe head seal | Epoxy glue |
| Outside Ø | 4 mm |
| Total length | 190 mm (inkl. SMA-Kupplung) |
| Max. immersion depth | 140 mm |
| Light path | 5 mm, 10 mm |
| Typ. transmission | UV/Vis approx. 30 % in air above 300 nm |
| Max. pressure | 6 bar |
| Max. temperature | 150 °C |
| Fibre-optic cable | Built-in, not exchangeable UV/Vis –2 m* 240 nm–1100 nm (41.667 cm-1–9.100 cm-1) NIR on request UV/Vis–low solarisation on request |
* Fibre-optic cables available in various lengths.
back